86
Image is blurred or out of focus.
The camera moves when
the shutter button is
pressed.
z
Confirm the procedures in
“
appears” (p. 84).
AF-assist Beam is set to
[Off].
z
In dark places where it is difficult for
the camera to focus, the AF-assist
Beam will emit to assist focusing. As
the AF-assist Beam will not function
when turned off, set it [On] to
activate it (p. 21). Take care not to
obstruct the AF-assist Beam with
your hand when used.
Subject is out of focal range.
z
Shoot with the subject at the
correct focusing distance (p. 112).
The subject is hard to focus
on.
z
Use the focus lock, AF lock or
manual focus to shoot (p. 45).
Subject in recorded image is too dark.
Insufficient light for shooting.
z
Set the flash to
(Flash on)
(
Basic Guide
p. 12).
The subject is
underexposed because the
surroundings are too bright.
z
Set the exposure compensation to
a positive (+) setting (p. 49).
z
Use the spot metering functions
(p. 48).
Subject is too far away for
flash to reach.
z
Shoot within correct flash range of
the subject when using the built-in
flash (p. 113).
z
Raise the ISO speed and then
shoot (p. 53).
Subject in recorded image is too bright, or
image flashes white.
Subject is too close, making
the flash too strong.
z
Shoot within correct flash range of
the subject when using the built-in
flash (p. 113).
z
Turn [On] the Safety FE (p. 56).
