manualshive.com logo in svg

Canon PIXMA MG5220 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon PIXMA MG5220 Series Скачать руководство пользователя страница 46

3-2.  Adjustment and Maintenance in User Mode  

 

Function

Procedures

Remarks

Nozzle check 
pattern printing

Perform via the machine operation 
panel, or from the printer driver 
Maintenance tab. 

Set a sheet of plain paper (A4 or Letter) in the 
cassette, or the rear tray if selected.

Print head 
manual 
cleaning

- Cleaning both Black and Color:  

Perform via the machine operation 
panel, or from the printer driver 
Maintenance tab.  

- Cleaning Black or Color separately, 

or both Black and Color:  
Perform from the printer driver 
Maintenance tab. 

Unclogging of the print head nozzles, and 
maintenance to keep the print head conditions good. 
If there is a missing portion or white streaks in the 
nozzle check pattern printout, perform this cleaning.

Print head deep 
cleaning

Perform via the machine operation 
panel, or from the printer driver 
Maintenance tab. 

If print head manual cleaning is not effective, 
perform this cleaning. Since the deep cleaning 
consumes more ink than regular cleaning, it is 
recommended to perform deep cleaning only when 
necessary.

Automatic 
print head 
alignment

Perform via the machine operation 
panel, or from the printer driver 
Maintenance tab. 

Set a sheet of Matte Photo Paper MP-101 (A4) in the 
rear tray. If the automatic print head alignment is not 
effective, perform manual print head alignment.

Manual print 
head alignment

Perform from the printer driver 
Maintenance tab. 

Set 3 sheets of plain paper (A4 or Letter) in the 
cassette, or the rear tray if selected.

Print head 
alignment 
value printing

Perform via the machine operation 
panel, or from the printer driver 
Maintenance tab. 

Confirmation of the current print head alignment 
values.

Paper feed 
roller cleaning

Perform via the machine operation 
panel, or from the printer driver 
Maintenance tab.

The paper feed rollers of the selected paper source 
(the rear tray or the cassette) rotate while being 
pushed to the paper lifting plate. Since the rollers will 
wear out in this cleaning, it is recommended that you 
perform this only when necessary.

Bottom plate 
cleaning

Perform via the machine operation 
panel, or from the printer driver 
Maintenance tab. 

Cleaning of the platen ribs when the back side of 
paper gets smeared. 
Fold a sheet of plain paper (A4 or Letter) in half 
crosswise, then unfold and set it in the rear tray with 
the folded ridge facing down. (No paper feeding from 
the cassette) 

LAN resetting

Perform via the machine operation 
panel, or using IJ Network Tool. 

Resetting of the LAN settings to default via the 
operation panel (

Setup

 -> 

Device settings

 -> 

LAN 

settings

 -> 

Reset LAN settings

), or using IJ 

Network Tool. 

42 / 62

Содержание PIXMA MG5220 Series



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды