Canon PIXMA MG5220 Series, Руководство по обслуживанию

Страница: 44 / 66

3. ADJUSTMENT / SETTINGS
3-1. Adjustment
MG5200 series TABLE OF CONTENTS
Adjustment Purpose Method Approx. time
EEPROM
initialization To initialize settings.
Service Tool
*1
,
EEPROM Clear
1 min.
Destination
settings
(EEPROM
settings) To set the machine destination.
- At logic board replacement
Service Tool
*1
,
Set Destination section
1 min.
Ink absorber
counter resetting
(EEPROM
settings) To reset the ink absorber counter.
- At ink absorber replacement
Service Tool
*1
,
Main in the Clear Ink Counter
section
1 min.
Ink absorber
counter value
setting
(EEPROM
settings) To set the data of the actual ink amount
absorbed in the ink absorber to the
EEPROM.
- At logic board replacement
Service Tool
*1
,
Ink Absorber Counter section
1 min.
Paper feed motor
position
adjustment To adjust the belt tension.
(Position the paper feed motor so that
the belt is stretched tight.)
- At paper feed motor replacement Fasten the screw using a
screwdriver that will fit to the
2.6mm-diameter screw. (See
3-
5. Special Notes on Servicing,
(2) Paper feed motor
adjustment
, for details.)
5 min.
Automatic print
head alignment To secure the dot placement accuracy.
- At print head replacement
- At logic board replacement
- When print quality is not satisfying Perform automatic print head
alignment in the user mode.
Recommended for the MG5200
series. 6 min.
Manual print head
alignment To secure the dot placement accuracy.
- At print head replacement
- At logic board replacement
- When print quality is not satisfying
even after automatic print head
alignment is performed
Perform manual print head
alignment in the user mode. 10 min.
Grease
application To maintain sliding properties of the
applicable portions.
- At carriage unit replacement
- At APP motor replacement Using a brush, etc., apply
FLOIL KG-107A. (See
3-4.
Grease Application , for details.)
1 min.
Ink system To maintain detection functionality for Service Tool
*1
,
1 min.
40 / 62