3
4
B
C
D
5
6
E
F
1
2
G
1 Preparation
Insert the power cord into the
connector on the left side at
the back of the machine and
into the wall outlet firmly.
The machine
may make
some operating
noises. This
is normal
operation.
It takes about
4 seconds for
the
ON
button
to work after the
power cord is
plugged in.
•
•
Press the
ON
button
(C), then adjust the
LCD (Liquid Crystal
Display) (D) to a
comfortable viewing
angle.
When this screen
appears, press the
OK
button, then go to the
next step.
When it is necessary to turn off the
machine
Operating noise may continue for up to 35 seconds
until the machine turns off.
Be sure to follow the procedure below.
1. Press the
ON
button to turn off the machine.
2. Make sure that the
POWER
lamp (G) is not lit.
Do NOT connect the
USB cable at this
stage.
Make sure that the
Document Cover (B) is
closed.
•
•
When removing the power
plug, make sure that the
POWER
lamp is not lit before
removing the plug. Removing
the power plug while the
POWER
lamp lights up or
flashes may cause drying and
clogging of the Print Head,
resulting in poor printing.
•
Use the
{
or
}
button (E) on
the Operation
Panel to select
the language for
the LCD, then
press the
OK
button.
If an unintended
language is
displayed on
the LCD, press
the
Back
button
(F) to return to
the
Language
selection
screen.
•
The specification of the power
cord differs for each country
or region.
•
