Canon PIXMA iP2700, Упрощенное руководство по обслуживанию

Страница: 3 / 23

(3/23)
Error
Error
code
LED
(Blinking in
orange)
Status Monitor message Solution
Non-supported
ink cartridge
installed.
[1485] 5 times The following ink cartridge cannot be
recognized.
Color
Black
Printing cannot be executed because
the ink cartridge may not be installed
properly or may not be compatible
with this printer.
Install the appropriate ink cartridge.
If you want to cancel printing, click
Cancel Printing.
A non-supported ink cartridge is
installed. Install the supported ink
cartridge. If the error is not
cleared, the ink cartridge may be
defective. Replace the ink
cartridge.
Ink cartridge in a
wrong position.
[1486] 7 times An ink cartridge is not installed in the
correct position.
Install the following ink cartridge in
the appropriate position. If printing is
in progress, cancel printing and
install the ink cartridge.
Color
Black
Install the ink cartridge(s) in the
correct position. If the error is not
cleared, the ink cartridge may be
defective. Replace the ink
cartridge.
Multiple ink
cartridges of the
same color
installed.
[1487] 7 times More than one ink cartridge of the
following type is installed.
Color
Black
Use only one ink cartridge per type at
a time.
Replace the wrong ink cartridge(s)
with the correct one(s). If the error
is not cleared, the ink cartridge
may be defective. Replace the ink
cartridge.
Warning: The
ink absorber
becomes almost
full.
[1700] 8 times The ink absorber is almost full.
Press the printer's RESUME button
to continue printing.
The printer will soon require servicing
to replace the ink absorber.
Contact the support center or the
service center.
The ink absorber can only be
replaced by a qualified technician.
Replace the ink absorber, and
reset its counter. (See 2-1,
Service Mode.) Pressing the
Resume/Cancel button will exit
the error, and enable printing
without replacing the ink absorber.
However, when the ink absorber
becomes full, no further printing
can be performed unless the
applicable ink absorber is
replaced.