Canon Paper Deck Unit-B1, Руководство по обслуживанию

Страница: 48 / 68

Chapter 4
4-6
F-4-22
Be sure to mount the front cover [1] so that the gap between the front
over [1] and the upper front cover [2] is 3 +/-1 mm.
F-4-23
If you inadvertently moved the paper level indicator belt [2] behind the
front cover [1] when removing the front cover, or moved the deck lifter,
move the deck lifter to its lower limit, and then move the arrow (shown in
the figure to the right) until it stops so that the area [3] of white increase; then,
mount the front cover.
(If the deck is operated without matching the paper level indicator and the
deck lifter position, the drive mechanisms of the paper level indicator can
suffer damage.)
F-4-24
[1]
[2]
[1]
[3]
[1]
[2]