Canon Paper Deck Unit-B1, Руководство по обслуживанию

Страница: 38 / 68

Chapter 3
3-8
F-3-37
3.5.4 Deck Separation Roller
3.5.4.1 Removing the Deck Separation Roller
0023-7342
1) Free the deck from its host machine, and remove the 2 screws [1] and the
separation roller support plate [2].
F-3-38
2) Detach the pickup roller [1] from the holder [2].
F-3-39
3) Detach the shaft [1] in the direction of the arrow.
F-3-40
The urethane sponge segment of the deck separation roller is pink imme-
diately after foaming; it changes in color from pink to orange and then to
yellow as time passes, accelerated if exposed to light. This is a general
characteristic of a urethane sponge, and will not affect its performance.
The part is not identified by its color, and there are not multiple parts clas-
sified according to color.
3.6 Electrical System
3.6.1 Deck Driver PCB
3.6.1.1 Removing the Deck Driver PCB
0023-7345
1) Remove the left rear cover.
2) Remove the rear cover.
3) Disconnect the 8 connectors [1], and remove the 4 screws [2]; then, detach
the deck driver PCB [3].
F-3-41
3.6.2 Open Switch PCB
3.6.2.1 Removing the Open Switch PCB
0023-7348
1) Open the compartment.
2) Remove the front cover (upper).
3) Remove the 2 screws [2] from inside the front cover (upper) [1], and de-
tach the open switch PCB [3].
F-3-42
[1]
[2]
[1]
[2]
[1]
[3]
[1]
[2]