Canon P-208, Руководство по обслуживанию с каталогом запчастей

Страница: 79 / 124

COPYRIGHT © CANON ELECTRONICS INC. 2012 CANON P-208 FIRST EDITION
5-13
CHAPTER 5 TROUBLESHOOTING
These values are changed when the
control PCB is replaced. After the replacing
the control PCB, input the same values as
before the replacement. If you don't know
the values before the replacement, input the
estimated values.
When the “Edit” button on the informa-
tion screen is selected, values are displayed
validly and can be modified.
Figure 5-217
If the [Apply] button on the information
screen is selected, the values are saved,
and if the [Cancel] button is selected, they
are not saved.
Figure 5-218
5. Write file
This mode is used to output the data
shown on the information screen as a text
file.
When [Write file] on the lower right side
of the screen is selected, displayed infor-
mation can be saved in a text file.
Operation Procedure
1) Select [Write file].
Figure 5-219
2) When the save screen is displayed, set
the save location.
Figure 5-220