Canon Oce TDS Series, Руководство администратора

Страница: 86 / 138

4. Install the printer driver: [Express installation]
NOTE
In a Peer to peer architecture, do not share the printer driver on a workstation.
In the step 2 of the below procedures, select 'No'.
Procedure
1.
The Océ Connect Assistant is launched. It connects to the printer controller in order to retrieve the
printer model and the printer information.
When detected, the printer model is displayed. Else, select your printer model from the list.
NOTE
When you select the printer model from the list, there is no back-channel performed
during the installation.
Click [Next].
2. Type a name for the new printer (see Caution concerning the printer names on page 82 ).
Check 'No' when you are requested to share the printer driver.
[15] Printer information
Click [Install].
The [Installation Wizard] performs the driver installation and configuration.
3. Once the driver is installed, click [Your printing defaults] to define the default values for your print
settings.
Then, you can:
• Verify the options of your printer, in the absence of back-channel ([Your printer options])
• [Print a test page]
• [Open Océ Express WebTools] to verify the printer controller configuration
• [Install another printer] or exit the [Installation Wizard].
4. Install the printer driver: [Express installation]
86 Chapter 3 - Print via LPD/LPR
Océ TDS/TCS/TC Connectivity information for Windows environments