Canon Oce TDS Series, Руководство администратора

Страница: 50 / 138

Step Action Illustration / Remark
8 Make sure that the ‘Host name’ field
is empty or 'Auto detected'.
If not, open the drop down list and
select the empty line or 'Auto detec-
ted'.
This will be suitable for most of the configura-
tions.
NOTE
Always use the drop down list. Nev-
er fill in the ‘Host name’ field man-
ually, in order to prevent typing mis-
takes.
9 Click 'OK'.
If you changed the ‘Host name’ field,
restart Océ Remote Logic or Océ
Power Logic Remote on the worksta-
tion. If the empty ‘Host name’ field causes Océ Re-
mote Logic or Océ Power Logic Remote con-
nectivity problems:
Repeat steps 6, 7, 8 but:
• Either select the workstation hostname or IP
address from the drop down list.
• Click 'OK' and restart the Océ TDS/TCS sys-
tem controller.
NOTE
Make sure that the selected parame-
ter (Océ TDS/TCS system hostname
or IP address) is permanent. Use a
fixed IP address or a DHCP reserva-
tion.
If the selected parameter changes:
• Océ Remote Logic or Océ Power
Logic Remote connection will be
lost,
• The Océ TDS/TCS applications on
the printer controller can become
slow.
NOTE
With the Océ Remote Logic application, repeat this procedure with the Settings Editor, the
System Control Panel and the Queue Manager.
Configure Océ printer controller remote applications on a workstation
50 Chapter 2 - Configure the print system controller
Océ TDS/TCS/TC Connectivity information for Windows environments