background image

3

FCC CAUTION

Changes or modifications not expressly approved by the party 
responsible for compliance could void the user's authority to operate 
the equipment.

Note:

 This equipment has been tested and found to comply with the 

limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
equipment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there 
is no guarantee that interference will not occur in a particular 
installation. If this equipment does cause harmful interference to radio 
or television reception, which can be determined by turning the 
equipment OFF and ON, the user is encouraged to try to correct the 
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that 

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.
Use of shielded cable is required to comply with Class B limits in 
Subpart B of Part 15 of FCC Rules.
Do not make any changes or modifications to the equipment unless 
otherwise specified in the manual. If such changes or modifications 
should be made, you could be required to stop operation of the 
equipment.
Canon U.S.A. Inc.
One Canon Park, Melville, NY 11747, U.S.A.
Tel. No. 1-800-OK-CANON (1-800-652-2666)
This transmitter must not be co-located or operated in conjunction with 
any other antenna or transmitter.

AVERTISSEMENT

Ce produit émet un flux magnétique de faible niveau. Si vous utilisez 
un stimulateur cardiaque ou pacemaker et éprouvez une sensation 
inhabituelle, éloignez-vous de la machine et consultez votre médecin.

RADIO INTERFERENCE REGULATIONS (For 120 V 
models)

This digital apparatus does not exceed the Class B limits for radio 
noise emissions from digital apparatus as set out in the interference-

causing equipment standard entitled “Digital Apparatus”, ICES-003 of 
the Industry Canada.

RÈGLEMENT SUR LE BROUILLAGE RADIOÉLECTRIQUE 
(For 120 V models)

Cet appareil numérique respecte les limites de bruits radioélectriques 
applicables aux appareils numériques de Classe B prescrites dans la 
norme sur le matériel brouilleur: “Appareils Numériques”, NMB-003 
édictée par l’Industrie Canada.

Für EMVG

Dieses Produkt ist zum Gebrauch im Wohnbereich, Geschäfts-und 
Gewerbebereich sowie in Kleinbetrieben vorgesehen.

Model Names

The following names may be provided for the safety regulations in 
each sales region of the Network Adapter.
NA10: Model 6830030, 6830050

European Union (and EEA) only.

This symbol indicates that this product is not to be 
disposed of with your household waste, according to 
the WEEE Directive (2002/96/EC) and your national 
law. This product should be handed over to a 
designated collection point, e.g., on an authorized 

one-for-one basis when you buy a new similar product or to an 
authorized collection site for recycling waste electrical and 
electronic equipment (EEE). Improper handling of this type of 
waste could have a possible negative impact on the environment 
and human health due to potentially hazardous substances that 
are generally associated with EEE. At the same time, your 
cooperation in the correct disposal of this product will contribute 
to the effective usage of natural resources. For more information 
about where you can drop off your waste equipment for recycling, 
please contact your local city office, waste authority, approved 
WEEE scheme or your household waste disposal service. For 
more information regarding return and recycling of WEEE 
products, please visit www.canon-europe.com/environment.
(EEA: Norway, Iceland and Liechtenstein)

Содержание NA10

































Отзывы: