background image

20

E

Mastering

the Basics

3. Load a cassette (

17

).

4. Slide the program selector to 

[

.

• This selects the camcorder’s Easy Recording program. It allows you to

simply point and shoot without making any manual adjustments (

59).

5. Press and release the start/stop button once to begin recording.

• For still image recording to a cassette, see p. 56. 

6. Press and release the start/stop button again to pause recording.

• The camcorder returns to record pause mode and PAUSE reappears in the

display.

• You can stop and restart recording as often as you like by pressing the

start/stop button.

Note:

• After loading a cassette, start recording when the tape counter has stopped.

• Replace the lens cap.
• Return the viewfinder to its retracted position.
• Return the LCD screen flush to the camcorder body.
• Unload the cassette.
• Turn the POWER switch to OFF.
• Disconnect the power source.

Notes:

• To check that the camcorder is recording correctly, make a test recording first.
• Before making important recordings, clean the video heads using a Canon

DVM-CL Digital Video Head Cleaning Cassette or a commercially available
digital video head cleaning cassette.

• To close the LCD panel, rotate it vertically until the screen faces you, then press

the upper right corner until it clicks securely closed.

• You cannot monitor the sound from the speaker when recording.
• For tips on how to make better videos, see p. 37.
• For extra recording time, set REC MODE to any mode other than SP (

21).

When you have finished recording

#2_ MV550i/530i__E(08-38)  1/9/02 15:26  Page 20

Downloaded From VideoCamera-Manual.com Manuals

Содержание MV530i





































































































































































Отзывы: