Canon MV530i Скачать руководство пользователя

Страница: 137 / 164

137

Additional

Information

DANGER!

Treat the battery pack with care.

• Keep it away from fire (or it might explode).
• Do not expose the battery pack to temperatures greater than 60°C (140°F).

Do not leave it near a heater, or inside a car in hot weather, for example.

• Do not try to disassemble or modify it.
• Do not drop or knock it.
• Do not get it wet.

WARNING!

• The battery used in this device may present a fire or chemical burn hazard if

mistreated. Do not recharge, disassemble, heat above 100°C (212°F) or
incinerate.

• Replace the battery with a Sony, Hitachi Maxell, Sanyo or Panasonic CR2025,

or Duracell DL2025. Use of another battery may present a risk of fire or
explosion.

• The used battery should be returned to the supplier for safe disposal.

Cautions:

• Do not pick up the battery using tweezers or other metal tools — this will cause

a short circuit.

• Wipe the battery with a clean, dry cloth to ensure proper contact.
• Keep the battery pack out of reach of children — if it is swallowed, contact a

physician immediately, as the battery case may break down and the battery
fluids damage the stomach and intestines.

• Do not disassemble, heat or immerse the battery in water, to avoid the risk of

explosion.

#6_ MV550i/530i__E(132-163) 1/9/02 14:55 Page 137

Downloaded From VideoCamera-Manual.com Manuals

Содержание MV530i





































































































































































Результаты поиска

Содержание MV530i

Отзывы:

Похожие инструкции для MV530i

Бренды по названию

Популярные бренды

Canon MV530i, Инструкция по эксплуатации

Результаты поиска

Содержание MV530i

Отзывы:

Похожие инструкции для MV530i

Бренды по названию

Популярные бренды