3-8
Printing on Banner Paper
Banner Paper is a continuous sheet of paper with perforations at equal distances along its length, where it can be
cut to the length required. For best results, use Canon Banner Paper. You can print banners from two to six sheets
in length.
• Always leave an extra sheet at the end of the banner—just in case the type runs over.
The shaded portion of the illustration below shows the maximum recommended printing area of Banner Paper.
• To prevent ink from running over the edges of the sheet, print within the margins shown above.
• Printing on Banner Paper may require considerable amounts of ink, so use new Ink Tanks if necessary.
• For best print results on Banner Paper, use light design patterns.
NOTE
11" (279 mm)
0.20" (5 mm)
1.10" (28 mm)
2 SHEETS MIN.
APPROX. 66"/1676 mm (6 SHEETS MAX.)
0.25"
(6.3 mm)
0.25"
(6.4 mm)
8.5"
(216 mm)
NOTE
1
Place the machine near the edge of a table
so that the paper can flow over the edge as
it exits the machine.
2
Push the Open button and lift up the
scanning unit.
3
Move the paper thickness lever to the right
and close the scanning unit.
