manualshive.com logo in svg

Canon MultiPASS C70, Руководство пользователя, Страница: 56 / 421

Поделиться
Скачать
Canon MultiPASS C70 Скачать руководство пользователя страница 56

2-18

Setting Up Your MultiPASS C70

Chapter 2

Connecting the Handset or a Telephone

If you have only one telephone line and plan to use the MultiPASS C70
for both fax transactions and voice calls, you will need to connect the
handset or a telephone to your unit.

Connect the line from the handset or the telephone to the jack marked 

h

on the side of the MultiPASS C70.

n

❏

If the connector does not fit the jack or does not seat properly, contact
your local authorised Canon dealer or the Canon help line, or your
telephone company to have the correct connector installed.

❏

Be sure to connect the handset or the telephone before using your
MultiPASS C70.

Содержание MultiPASS C70






































































































































































































































































































































































































































Отзывы:

Нет отзывов