manualshive.com logo in svg

Canon MultiPASS C70, Руководство пользователя, Страница: 131 / 421

Поделиться
Скачать
Canon MultiPASS C70 Скачать руководство пользователя страница 131

Chapter 5

Paper Handling

5-17

P

aper Handling

4. Make sure the flaps of the envelopes are flat and not curled.

5. Insert the stack of envelopes into the multi-purpose tray until it

stops, so that the right edge of the stack is aligned with the right
side of the multi-purpose tray. Then slide the paper guide snugly
against the left edge of the stack.

❏

Insert the envelopes with the print side up.

❏

Feed the top of the envelope (return address portion) into the
multi-purpose tray first.

❏

Make sure the back flap is towards the multi-purpose tray.

The MultiPASS C70 is now ready to print envelopes.

FLAP

Содержание MultiPASS C70






































































































































































































































































































































































































































Отзывы:

Нет отзывов