Canon MultiPASS C100 Скачать руководство пользователя страница 78

Страница: 78 / 210

6-12

Speed Dialling

Chapter 6

Using Group Dialling

To use this feature, you must first register a group of fax numbers for one-touch or
coded speed dialling. (

p. 6-9)

Follow this procedure to send a document to a group of destinations registered under a
one-touch speed dialling button or coded speed dialling code:

Open the document tray.

Adjust the document feed lever for the
document you are loading. (

p. 4-2)

Prepare the document and load it, face
down, in the ADF. (

p. 4-4)

• For colour sending, press Colour/B&W to

(Currently used memory)

turn on its light. (

p. 7-2)

• To adjust the resolution and contrast,

pp. 7-3, 7-4.

(Standby to scan)

Enter the group registered under a one-
touch speed dialling button or coded speed
dialling code.

❚

To enter a group registered under a one-
touch speed dialling button:
Press the one-touch speed dialling button
assigned to the group you wish to fax.

• If you press the wrong button, press Stop,

then press the correct button.

❚

To enter a group registered under a coded
speed dialling code:
Press Coded Dial, then use the numeric

Ex:

buttons to enter the two-digit code assigned
to the group you wish to fax.

• If you enter the wrong code, press Stop.

Then press Coded Dial and enter the correct
code.

Press Start to begin scanning for sending,
or wait a few seconds for the MultiPASS to
begin scanning automatically.

• If you prefer the MultiPASS never to scan a

document automatically after a few seconds,
disable the

TIME OUT

setting. (

p. 14-6)

TEL=GROUP DIAL

21=

TEL=GROUP DIAL

DOCUMENT READY

MEMORY USED 0%

Содержание MultiPASS C100



















































































































































































































Результаты поиска

Содержание MultiPASS C100

Отзывы:

Canon MultiPASS C100, Руководство пользователя, Страница: 78 / 210

Результаты поиска

Содержание MultiPASS C100

Отзывы: