manualshive.com logo in svg

Canon MF512 Series, Руководство пользователя, Страница: 755 / 913

Поделиться
Скачать
Canon MF512 Series Скачать руководство пользователя страница 755

#018

A fax could not be sent since the recipient's machine did not respond because the line was busy or for

other reasons.

●

When the recipient's machine is turned OFF or the line is busy, a fax may not be sent. Ask the recipient to
check the machine status. When sending the fax overseas, insert pauses in the fax number.

Sending Faxes (MF515x)(P. 148)

#022

Sending of a fax from a computer is disabled.

●

To  send  a  fax  from  a  computer,  you  need  to  set  <Allow  Fax  Driver  TX>  to  <On>.  For  more  information,
contact your Administrator.

Prohibiting PC Faxing (MF515x)(P. 559)

A fax could not be forwarded because the specified destination was deleted from the Address Book.

●

Register  the  forwarding  destination  again.  If  the  documents  that  failed  to  be  forwarded  remain  in
memory, you can forward it again.

Registering in the Address Book(P. 77)
Printing/Resending/Deleting Documents that Failed to be Forwarded(P. 194)

#037

Memory is full.

●

If a sending or printing job is queued, wait until the job is completed.

●

If a received document is stored to memory, print or delete it.

Storing Received Faxes into Memory (Memory Reception)(P. 187)

●

If sending a document with many pages, divide it into multiple sections.

●

If sending a fax, reduce the resolution to scan the document.

Adjusting Resolution(P. 166)

#099

Printing, sending, or receiving was canceled.

●

When you cancel an operation, this error code is displayed, but this is not abnormal. Print, send, or receive
documents again as necessary.

#401

A scanned document could not be stored to a USB memory device due to insufficient memory space.

Troubleshooting

746

Содержание MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов