Canon MF512 Series Скачать руководство пользователя страница 748 | Manualshive

Страница: 748 / 913

Canon MF512 Series Скачать руководство пользователя страница 748

No Paper

Paper is not loaded in the paper drawer or the multi-purpose tray.

●

Load the paper.

Loading Paper(P. 50)

Paper on which reports or lists can be printed is not loaded.

●

Reports or lists can be printed on plain/recycled/color paper of A4 or Letter size. Load appropriate paper,
and make settings for paper size and paper type.

Loading Paper(P. 50)
Specifying Paper Size and Type(P. 66)

Paper on which received documents can be printed is not loaded.

●

Received documents can be printed on plain/recycled/color paper of A4 or Letter size. Load appropriate
paper, and make settings for paper size and paper type.

Loading Paper(P. 50)
Specifying Paper Size and Type(P. 66)

●

If you print received documents on paper other than A4 or Letter size, some portions of the image may be
missing or the image may be divided and printed onto several sheets.

No reply from the destination.

A network cable may be disconnected, or there may be a problem in a switch.

●

Check the status of the network cables and switches.

No response from the host.

The machine is not connected to a network correctly.

●

Check the machine and network settings, and connect again.

Connecting to a Network(P. 414)

Paper jammed.

Paper jams.

●

Remove the jammed paper or document, and print again (Printing may resume automatically).

Clearing Jams(P. 722)

Paper Size & Settings Mismatch

The paper size setting on the operation panel does not match the loaded paper size.

Troubleshooting

739

«
...
746
747
748
749
750
...
»

Содержание MF512 Series


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов