Canon ME20F-SHN, Руководство по эксплуатации сети

Страница: 89 / 185

Sett
ing Page
4
89
By registering settings as presets, such as camera angles and camera settings (e.g. exposure), the presets can be easily
called up by Viewers to apply the settings.

Using Presets
In addition to immediate execution of registered camera angles and the camera settings such as exposure when
operating the viewer, you can execute the presets during switches between the normal capture and infrared modes
(P. 134) or at the start time of the timer event (P. 109).
Registering a Preset
The camera angle and camera settings can be registered as a preset.
The number of presets you can register are 21 at maximum (including the home position).
The preview frame (blue) indicates the position currently cropped into the video display area.
[Camera] > [Preset]
Registering Presets
Important
• Reconfigure the presets if you change the [Basic] > [System] > [Installation Conditions] > [Scan Reverse] (P. 79) settings.
• Reconfigure the presets if you change the zoom position.
The following settings can be configured here.
• Register Preset
1
Operate the video display area and full-view screen to set the angle you want to register as the preset.
Video Display Area Full-View Screen
Preview Frame