Connecting to the Network
15
Connecting to the Network
When connected to the network, the camera not only enables you to remotely operate it, but also allows you
to record the video and perform monitoring with various intelligent functions.
Also with PoE+ functions supported, the camera can be supplied with power via a LAN cable connected to a
PoE+ HUB (
A
Use a category 5 or better LAN cable, 100 m (328 ft.) or less in length.
NOTES
• To connect a camera to the network, it is necessary to first set the administrator account for the camera,
then configure the network settings such as an IP address. Use the Camera Management Tool to configure
such initial settings as above for using the camera via the network. Refer to
Network Operation Guide
or
Camera Management Tool User Manual
for more details.
• Only the following combination is available for video output via a network.
System frequency: 59.94 Hz
Frame rate: 29.97P
Resolution: 1920 x 1080
Network HUB
LAN cable
