Canon MACRO SPEEDLITE MR-14EX, Инструкция по эксплуатации

Страница: 35 / 136

33
1
Set the MR-14EX or MT-24EX as
the master unit.
Press the <
D
> button to select
<
a
>.
Press the < f > button to select
<
yk
>.
X <
w
> will be displayed.
Press the < e > button to select a
channel 1 to 4.
2
Set the slave unit.
Set the same channel as with the
master unit.
Set the ID to <
C
>.
As for the setting procedure, refer to
the slave Speedlite’s instruction
manual.
3
Position the slave unit(s).
Face the slave unit C’s sensor toward
the master unit.
Do not put any obstructions between
the master unit and slave unit(s) C.
4
Check that the flash is ready.
When the slave unit(s) C is ready to
fire, the AF-assist beam will blink for 1
sec.
MR14_MT24_03.fm Page 33 Tuesday, December 20, 2005 4:36 PM
COP
Y