39
LAMPS Menu
Label
Description
Mode
Press
ENTER
to enter the
Mode
menu. Press ▲ or ▼ to select lamp mode.
The options are
Dual
,
Lamp 1
,
Lamp 2
and
Single
.
Note:
1.
In
Lamp 1/2
mode, the projector switches between lamps when a lamp
error is detected. The corresponding lamp LED flashes.
2.
A system reboot is recommended after setting the lamp mode to
Single
mode. In Single mode, the projector choose shorter one of the
lamp usage time at start up, and use it while the Lamp is ON.
3.
Lamp life may be shortened if the user quickly switches between
lamp mode. Lamp mode function is disabled between switch mode
operations until the operation is completed.
4.
The lamp mode options are not available before lamp mode switching
is complete. It takes about 5 minutes.
Power
Press ◄ or ► to select a power mode. The options are
Normal
,
Eco
and
Custom Power Level
.
High Altitude
This setting is required under the following conditions.
Temperature
Sea Level
5°C ≤ , ≤ 23°C
1200 m ~ 3000 m
23°C < , ≤ 40°C
1219 m ~ 3048 m
Press ◄ or ► to enable or disable the cooling fan of the projector.
Note:
If the projector is in operation in a high heat or high altitude environment,
it may shut down automatically. In this setup, you can enable the
High
Altitude
function by selecting
On
and setting the fan to operate at a higher
speed to maintain proper cooling levels on the projector.
Custom Power Level
Press ◄ or ► to adjust custom power level. The function is only available
when
Power
is
Custom Power Level
.