36 Operation
Shutting down the projector
1. Press
and a confirmation message will appear
prompting you. If you don't respond in a few
seconds, the message will disappear.
2. Press
a second time.
3. The power indicator becomes a steady red and fans
stop. Disconnect the power cord from the power
outlet.
• The brightness level of the projected image will change accordingly when you switch between
different input signals.
• For best display picture results, you should select and use an input signal which outputs at the
projector’s native resolution. Any other resolutions will be scaled by the projector depending
upon the “aspect ratio” setting, which may cause some image distortion or loss of picture
clarity. See
.
The indicator lights may stay lit even after you unplug the power cord. However, this is not a
malfunction.