Canon LV-S3E/D78-5423, Руководство по обслуживанию

Страница: 63 / 106

Part 4: Troubleshooting
4-4
1.2 No Picture
Check following steps.
No picture with all of
input sources
Check signal processing stage and LCD driving stage;
Check RGB S&H signals at test points TPR1, TPG1, TPB1.
Check NRS signals at test points TP2531 and TP2561.
Check power supply circuit 15VP and peripheral circuit.
Check ICs IC501, IC531, IC561, IC3531, IC401, IC9401,
IC301 and peripheral circuit.
Check PC source selecting stage;
Check IC5201 and peripheral circuit on the AV board.
RGB signals are selected at RIN1/GIN1/BIN1 of IC5201 and
sent to IC8201, A/D converter IC.
Check RGB signals at test points TP6202R/G/B.
H/V sync signal is output from IC5201 and sent to IC301
through IC5301 and IC5303.
GSYNC signal of the source without H/V sync signals is
output from IC5201, and sent to IC5301 and IC5302, then
sync separated signals are sent to IC301 through IC5303.
PC/AV_SW signal is applied on IC5303, output from pin 14 of
IC3551 for selecting sync signals.
Check H/V_SYNC signal at test points TPGHS/TPGVS.
No picture with Computer
RGB input source
Check PC source selecting stage;
RGB (Scart) signals are sent to IC101, Video decoder IC.
Check RGB signals at pin 3, 2 and 1 of IC101.
CV_SCART signal for sync is sent to pin 72 of IC101.
Check CV_SCART signal and test points TPVHS/TPVVS.
No picture with Computer
RGB (Scart) input source
Go to next page
Yes
Yes
Check AV source selecting stage;
Check S-video signal (Y/C) on the AV and Main board.
Check IC101, Video decoder, and peripheral circuit.
S_SW signal (S-Video cable is connected:L) is applied on pin
9 of IC1811.
No picture with S-VIDEO
input source
Yes
No
No
No
Yes