When hanging a projector from the ceiling using this attachment (hereinafter called
“the ceiling attachment”), the ceiling must have adequate strength to support the
projector, the projector attachment and the ceiling attachment. Before installation,
check the combined weight of the projector, projector attachment and ceiling
attachment as well as the strength of the ceiling based on that weight. If the strength
is insufficient, provide adequate reinforcement before proceeding. Otherwise, the
projector may fall and cause injury.
●
When installing the projector, take appropriate measures using wire or other means to prevent falling due to an earthquake
or other vibration. Otherwise, the projector may fall, causing injury.
●
Always install to a level ceiling. Never install to an inclined ceiling.
The total weight of the ceiling attachment is 5.9 kg.
■
Installation Precautions
■
Parts List
Projector attachment......1
Drop-prevention wires...2
Assembly and Installation
Manual (this manual)
Fastening plates......2
Screws C......4
M6 x 14mm
(Phillips head hex bolt
with integrated spring washer
and flat washer)
Screws A......4
M4 x 10mm
(Phillips head machine screw
with integrated spring washer
and flat washer)
Screws D......4
M3 x 8mm
(Phillips head machine screw
with integrated spring washer)
Screws B......5
M4 x 18mm
(Phillips head machine screw
with integrated spring washer
and flat washer)
3
Ceiling Attachment.....1
Wench.....1
Caution