Canon LV-7290 Скачать руководство пользователя страница 65

Страница: 65 / 83

POWER

AUTO SET

LAMP REPLACE

WARNING

VOL

The WARNING indicator shows the state of the function which protects the projector. Check the state of the

WARNING indicator and the POWER indicator to take proper maintenance.

WARNING indicator

The projector is shut down and the

WARNING indicator is blinking red.

When the temperature inside the projector reaches

a certain level, the projector will be automatically

shut down to protect the inside of the projector. The

POWER indicator is blinking while the projector is

being cooled down. When the projector has cooled

down enough (to its normal operating temperature),

it can be turned on again by pressing the POWER

button.

The projector is shut down and the

WARNING indicator lights red.

When the projector detects an abnormal condition, it

is automatically shut down to protect the inside of the

projector and the WARNING indicator lights red. In

this case, unplug the AC power cord and reconnect

it, and then turn the projector on once again to verify

operation. If the projector cannot be turned on and

the WARNING indicator still lights red, unplug the AC

power cord and contact the service center.

WARNING

DO NOT LEAVE THE PROjECTOR WITH

THE AC POWER CORD CONNECTED

UNDER AN ABNORMAL CONDITION.

IT MAY RESULT IN FIRE OR ELECTRIC

SHOCK.

Top Control



Note:

The WARNING indicator continues to

blink even after the temperature inside

the projector returns to normal. When

the projector is turned on again, the

WARNING indicator stops blinking.

Then check the matters below:

– Did you provide appropriate space for

the projector to be ventilated? Check the

installing condition to see if the air vents of

the projector are not blocked.

– Has the projector been installed near an Air-

Conditioning/ Heating Duct or Vent? Move

the installation of the projector away from

the duct or vent.

– Is the filter clean? Clean the filter

periodically.

WARNING

blinking red

Maintenance and Cleaning

POWER

AUTO SET

LAMP REPLACE

WARNING

VOL

WARNING

lights red

Содержание LV-7290




















































































Результаты поиска

Содержание LV-7290

Отзывы:

Похожие инструкции для LV-7290

Бренды по названию

Популярные бренды

Canon LV-7290, Руководство пользователя

Результаты поиска

Содержание LV-7290

Отзывы:

Похожие инструкции для LV-7290

Бренды по названию

Популярные бренды