LV-7290 / LV-7295 / LV-7390/ LV-8225 Expand Serial Command Functional Specifications
12
5.7 Setting Command Table
Execute command
Item
CF_LANG_%1[CR]
Select language for OSD
CF_MENUPOSITION_%1[CR]
Move menu position.
CF_INPUTSEARCH_%1[CR]
Set up Auto input function
CF_AUTOSETUPPCADJ_%1[CR]
Set Auto PC in Auto Setup
CF_AUTOSETUPKEYSTONE_%1[CR]
Set Auto Keystone in Auto Setup
CF_AUTOSETUP_%1[CR]
Execute Auto Setup
CF_BACKGND_%1[CR]
Set screen mode for the case of no signal
CF_DISP_%1[CR]
Set Display function
CF_LOGO_%1_%2[CR]
Set Logo function
CF_TERMINAL_%1[CR]
Set Terminal function
CF_P-MANE_%1[CR]
Set Power management mode function
CF_P-MANETIME_%1[CR]
Set Power management time
CF_ON-STA_%1[CR]
Set Direct power on function
CF_STANDBYMODE_%1[CR]
Set Standby Mode
CF_PTIMEMODE_%1[CR]
Select P-timer mode
CF_PTIMER_%1[CR]
Execute P-timer
CF_PTIME_%1[CR]
Set Countdown timer for P-timer
CF_CCAPTIONDISP_%1[CR]
Set channel of Closed caption
CF_CCAPTIONCOLOR_%1[CR]
Set color of Closed caption
CF_RCODE_%1[CR]
Select Remote Control Reception Code
CF_KEYDIS_%1[CR]
Disable RC/Projector keys
CF_PJPINCODE_%1[CR]
Input PIN code to release PJ Lock
CF_FANMODE_%1[CR]
Select Fan mode
CF_FANCONTROL_%1[CR]
Select Fan control mode
CF_DELAYCTRL_%1[CR]
Set Video delay control
CF_FILTIMER_%1[CR]
Set time when Filter warning OSD is displayed
CF_FILH_%1[CR]
Reset Filter used time
CF_FDEFAULT_%1[CR]
Set the value to Factory Default
5.8 Other Command Table
Execute command
Item
CF_KEYEMU_%1[CR]
Behave the same as corresponding key of projector
top panel
CF_MENU_%1[CR]
Switch ON/OFF of each Menu.
CF_POWER_%1[CR]
Switch ON/OFF of Power.
CF_FREEZE _%1[CR]
Set Freeze function.
CF_VMUTE _%1[CR]
Set Blank function.
