manualshive.com logo in svg

Canon lpb3360, Руководство пользователя

Поделиться
Скачать
Canon lpb3360 Скачать руководство пользователя страница 40

2-3

Installing the Pr

inter

2

Environments

Environments

In order to use this printer in a safe and comfortable manner, install the printer in a 
place that fulfills "Temperature/Humidity Conditions", "Power Supply 
Requirements", and "Installation Requirements" described in "Installation 
Environment".

IMPORTANT

Before installing the printer, be sure to read "Important Safety Instructions" (See p. xvi).

 

Installation Environment

Select an installation site for this printer in view of the following environmental 
conditions.

Temperature/Humidity Conditions

Use the printer in a location where the temperature and humidity are in the 
following ranges.

•

Ambient temperature: 10 to 32.5 °C (50 to 90.5 °F)

•

Ambient humidity: 20 to 80 % RH (no condensation)

IMPORTANT

•

Water droplets (condensation) may form inside the printer under the following 
circumstances. Leave the printer for two hours or more to adjust to the surrounding 
temperature and humidity before using it.
- When the room where the printer is installed is heated rapidly
- When the printer is moved from a cool or dry location to a hot or humid location

•

If water droplets form inside the printer, the paper transport path will not function 
properly, and this may result in paper jams, damage to the printer, or printer error.

■

To customers using an ultrasonic humidifier

If you use an ultrasonic humidifier in conjunction with tap water or well water, impurities in 
the water will be dispersed through the air. These can be trapped inside the printer, 
causing degradations in printing quality. When you are using these humidifiers, it is 
therefore recommended that you use purified water or other water that is free of 
impurities.

Downloaded from ManualsPrinter.com Manuals

Содержание lpb3360



















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды