manualshive.com logo in svg

Canon lpb3360, Руководство пользователя

Поделиться
Скачать
Canon lpb3360 Скачать руководство пользователя страница 264

8-27

Message List

8

Tr

oub

leshooting

Message List

When the printer cannot continue printing for some reason (an error status), the 
printer beeps, the 

 (Message) indicator comes on, and an error message that 

indicates the description of the error appears in the display. A Warning message 
appears in the display when the printer requires some remedy (a warning status) 
although the job is not affected.

If either of these messages appears, perform the following procedures according to 
the message.

NOTE

•

When multiple warnings are occurring at the same time, the Warning messages appear 
by rotation.

•

When the printer is in error status and warning status at the same time, the Warning 
message does not appear.

•

Even when a message with (Warning Message) appears (when the printer is in a 
warning status), the printer does not stop printing.

•

For a message with the <Auto Error Skip> mark, you can skip the error by pressing the 

 (Online) key and continue printing. However, part of the print data may be missing or 

it may not be printed properly. When you want to stop the process, perform a soft reset to 
eliminate the cause of the error, press the 

 (Online) key, and then print again. Also, 

you can automatically skip the errors to which this mark is attached by setting AUTO 
ERROR SKIP in the SETUP menu to ON.

<E nnn-nnnn> ("n" represents a number)

Cause

A problem has occurred inside the printer.

Remedy

Solve the problem following the instructions in "Service Call Display" (See p. 
8-37).

<00 NO SLOT LOAD>

Cause

Because the printer is in the middle of printing, it forbids loading paper in the 
manual feed slot.

Remedy

When loading paper in the manual feed slot, wait until printing and printer 
operation finish completely.

Downloaded from ManualsPrinter.com Manuals

Содержание lpb3360



















































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды