Canon LBP253 SM, Руководство пользователя

Страница: 151 / 167

COPIER > OPTION > BODY
Item Description
Details To set the location. At installation in areas other than Japan, perform the following procedure to match
the setting information with that of the location.
Use case • At installation
• When changing the location information
Adj/set/operate method 1. Enter the setting value under LOCALE, and then press Apply key.
2. Set the paper size configuration under SIZE-LC.
3. Execute COPIER > FUNCTION > CLEAR > ALL.
4. Turn OFF/ON the main power switch.
Caution Since COPIER> FUNCTION> CLEAR> ALL is executed when changing the location, the setting in-
formation of user mode, service mode, etc. is initialized. The setting information of this item is not
initialized.
Display/adj/set range 1 to 8
1 : Japan
2 : North America
3 : Korea
4 : China
5 : Taiwan
6 : Europe
7 : Asia
8 : Oceania
Default value 1
Related service mode COPIER> FUNCTION> CLEAR> ALL
COPIER> OPTION> BODY> SIZE-LC
SIZE-LC
Title Setting of paper size configuration
Details To set the paper size configuration. At installation in areas other than Japan, perform the following
procedure to match the setting information with that of the location.
Use case • At installation
• Upon user's request
Adj/set/operate method 1. Set the location under LOCALE.
2. Set the paper size configuration under SIZE-LC, and then press Apply key.
3. Execute COPIER > FUNCTION > CLEAR > ALL.
4. Turn OFF / ON the main power switch.
Caution Since COPIER > FUNCTION > CLEAR > ALL is executed when changing the location, the setting
information of user mode, service mode, etc. is initialized. The setting information of this item is not
initialized.
Display/adj/set range 1 to 4
1 : AB configuration
2 : Inch configuration
3 : A configuration
4 : AB / Inch configuration
Related service mode COPIER > FUNCTION > CLEAR > ALL COPIER > OPTION > BODY > LOCALE
MIBCOUNT
Title Setting of MIB collection charge counter
Details To set the range of charge counter information that can obtain MIB (Management Information Base).
Use case When preventing the Charge Counter MIB from being used by a third party
Adj/set/operate method 1. Enter the setting value, and then press Apply key.
2. Turn OFF / ON the main power switch.
Display/adj/set range 0 to 2
0: All charge counters are obtained
1: Only the displayed counter* is obtained
2: All charge counters are not obtained
*: Counter specified by the following: COPIER > OPTION > USER > COUNTER 1 to 6
Default value 0
Related service mode COPIER > OPTION > USER > COUNTER1 to 6
NS-CMD5
Title Setting of CRAM-MD5 authentication method at SMTP authentication
Details Restriction of the use of CRAM-MD5 authentication method at SMTP authentication When 1 is set,
CRAM-MD5 authentication method is not used.
7. Service Mode
144