Canon LBP1760P, Руководство по обслуживанию

Страница: 96 / 394

VII. PAPER FEEDER
A. Outline
The operation sequences of the paper feeder are controlled by the paper feeder driver. A 4-bit
microprocessor is used in the paper feeder driver, which controls the sequences of the paper
feeder and the serial communication with the engine controller of the printer.
The engine controller outputs the pick-up command to the paper feeder driver at the neces-
sary timing. The paper feeder driver drives the solenoid in response to the command. The paper
feeder driver also sends back the status of the paper feeder to the engine controller.
The printer su24VDC to the paper feeder. The paper feeder driver gen3.3V
for the ICs based on this +24V.
The flow of input/output signals to/from the paper feeder driver PCB is as shown below.
Figure 2-7-1
2 - 58
CHAPTER 2
Paper feeder driver PCB
Accepts the command when "L." /SEL1
+24VA
J801-1
-2
-3
J811-3
-2
-1
To printer
Command input
Status output
Serial clock SOUT
SIN
SCLK
J801-4
-5
-6
J812-3
-2
-1
To printer
Paper sensor
PS801
J813-3
-1
-2
+24VA
J803-1
-3
-2
OPT SNS "L" when the sensor detects paper.
+24VA
Pick-up solenoid
SL801
OPT SOL Starts paper pick-up when "L."
Paper size detection switches
Size of the paper in the cassette is
detected by the combinations of these
switches.
SW801
SW802
SW803
J802-1
-2