Canon LBP1760P, Руководство по обслуживанию

Страница: 24 / 394

C. Unpacking and Installation
Condensation appear on metal surfaces in the printer when brought from a cold area into a
warm area. Also, since the condensation can cause various troubles including print defects, in
such a case, leave it in the carton at room temperature for at least an hour so that it is accli-
matized to room temperature.
When installing the options, be sure that the printer is powered OFF.
1. Printer
1) Open the printer packaging.
2) Take out the accessories. Confirm that the power cord, cartridge, CD-ROM, and manuals
are included.
3) Take the plastic bag off the printer and peel the tape off each part. Confirm that none of the
covers were scratched or deformed during shipment.
4) Open the top cover and remove the tape and packing materials from inside the printer.
5) Remove the tape and spacer from the face-down tray.
6) Take out the cassette from the printer, and remove the packing materials from the cassette.
2. Cartridge
1) Open the bag holding the cartridge and take out the cartridge.
2) Hold the cartridge as shown in figure 1-5-2 and slowly rock it to right and left 5 to 6 times
so that the toner is evenly distributed.
3) Place the cartridge on a flat surface. While holding down on the top of the cartridge with one
hand, grasp the tab with the other hand and gently pull out the sealing tape.
4) Open the top cover of the printer and load the cartridge in the printer. Make sure to insert
the cartridge until it firmly contacts with the back of the slot.
3. Paper feeder
1) Open the paper feeder packaging.
2) Take out the paper feeder with the front and rear pads from the package.
3) Take the plastic bag off the paper feeder and peel the tape off each part. Confirm that none
of the covers were scratched or deformed during shipment.
4) Remove the packing materials from the paper feeder.
5) Place the paper feeder on a flat surface.
6) Lift the printer, and align the positioning pins of the paper feeder with the positioning holes
of the printer.
4. Envelope feeder
1) Open the envelope feeder packaging.
2) Take off the plastic bag and peel the tape off. Confirm that none of the covers were scratched
or deformed during shipment.
3) Remove the packing materials from the envelope feeder.
4) Open the multi-purpose tray of the printer, remove the envelope entrance cover, and open
the envelope feeder gear cover.
5) Holding the envelope feeder with both hands, install it into the printer.
5. Duplexing unit
1) Open the duplexing unit packaging.
2) Take off the plastic bag and peel the tape off. Confirm that none of the covers were scratched
or deformed during shipment.
3) Remove the packing materials from the duplexing unit.
4) Remove the 2 duplexing unit slot covers from the printer.
5) Holding the duplexing unit with both hands, install in into the printer.
1 - 14
CHAPTER 1