Canon LBP-860, Руководство по обслуживанию

Страница: 37 / 219

CHAPTER 2
OPERATION AND TIMING
1. This chapter describes printer functions. the relationships between mechanisms and
circuits, and the timing of operations. Mechanical linkages are indicated by black and
white lines the of control signals by solid arrows and the flow of
groups of signals by outline arrows
2. An active-high signal is indicated or by a signal name without a slash in front of it,
such as Au active-low signal Is indicated by or by a signal name with a slash in
front of, such as
A signal that is “H” or has a name without a slash is active at the supply voltage level
[indicating that the signal is being output). and inactive at ground level (indicating that the
signal is not being output).
A signal is or has a slash in front of its name is active at ground level, and
inactive at the supply voltage level.
There is a microcomputer in this printer. But as the internal operation of the
microcomputer cannot be checked, an explanation of the operation of the microcomputer
has been left out.
As it is assumed that no repair will he made to customer circuit boards, the explanation
of board circuits is limited to an outline using block diagrams. So there are two types of
circuit explanation: everything from the sensor to the input sections of the major circuit
boards, everything from the output sections of the
major
circuit boards to the loads.
These are explained block diagrams according to the function.
OPERATION . . . . . . . . . . . . . . . . 2-1
V. OVERALL CONTROL . .
II. SYSTEM..... 2-7
VI. POWER SUPPLIES.. ................
III. FORMATION SYSTEM. 2-16
VII. ENVELOPE FEEDER.. .............
N . PICK-UP/FEED SYSTEM . . . . . . . . 2-27
VIII. PAPER FEEDER.. ...................