Canon LBP-860, Руководство по обслуживанию

Страница: 26 / 219

CHAPTER
C. PCL PRINT MENU Options
The PCL MENU contains the most commonly used options. You can override or change
all options in this menu through your software application. The changes you make through the
operator panel become the permanent default settings.
MENU
option default Description
COPIES
FNT SRC
FNT
NUMBEK
PITCH
SIZE
Selects the number of copies [from 1 to 99) you want to print.
Selects the font source. You can select:
INT:
Internal fonts
CART: Cartridges
Permanent soft font
You see the CART option only if a cartridge is installed, and you see
the option only permanent fonts are downloaded.
If you do not know the font source and font number, you can a
Font List. The letter you specify here must match the alpha portion
of the Font on the Font List. For more information about printing
this list. see the Printing the Font List section.
0
12.00
Identifies the Font Number through 999) as listed on the Font
List. Make sure you use the Font # not the Font ID.
If you have installed a font cartridge with a default mark, the
default-marked font overrides the factory default font. The cartridge
default font appears in the PCL PRINT MENU until you a
different through the operator panel or your software
application, you remove the cartridge. or insert a different cartridge
when the default number is 0. The symbol set for the PCL PRINT
MENU is not changed by the marked cartridge.
Selects pitch sizes from 0.44 to 99.99 characters per inch in
scroll increments of 0.01. [Hold down the arrow key to increment
rapidly.) You can select a pitch if the font indicated by FNT SRC and
FNT NUMBER is a scalable typeface
fixed spacing. The
860 adjusts the height (point size) of the characters according to the
pitch you select.
Selects the point size from 4.00 to 999.75 points in
increments. The scroll increment is 0.25 or 1.00 (if you hold down
the arrow key). You can select the point size if the font indicated by
FNT SRC and FNT NUMBER is a scalable font with proportional
spacing.
Point size is a measure of the vertical height of a character in
of an inch. The LBP-860 adjusts the character’s horizontal spacing
according to the point size you select.