English
Connecting to the Power Supply
15
Connecting to the Power Supply
Before inserting the plug, make sure that the rating indicated on the
printer matches the voltage of the AC outlet.
1.
Plug the power cord into the power socket.
2.
Connect the other end of the power cord to the AC outlet.
3.
Turn on the printer by pressing the
I
mark. Turn off the printer by
pressing the
O
mark.
If the power does not turn on even when the printer is plugged into an AC
outlet, check the following items:
❏
Close the front cover if open.
❏
Make sure the EP-22 cartridge is installed.
❏
If the EP-22 cartridge is already installed, remove and reinstall it.
❏
To reset the printer, turn off the power using the power switch, and
unplug the power cord. Wait two seconds or more, then connect the
printer to the AC outlet again.
On position
Off position
