Canon LBP-2000, Руководство пользователя, Страница: 58 / 263

Printing from the Multi-Purpose Tray 3-20
3
Input and Output of the P
aper
4
Insert the paper stack as far as it will go into the printer, with
the print side facing down and the top of the paper going into
the printer first.
Press the paper stack so it is below the limit guide.
IMPORTANT
•
Make sure that the leading edge of the paper is inserted all the way into the tray so
that it is below the paper feed roller. The paper sensor for the tray is located
underneath the paper feed roller. Please note the following points when loading
small size paper in the tray. (If the paper is not loaded correctly, the paper will not
be detected by the printer and a message will appear asking you to load paper in
the tray.)
•
Make sure that the paper guides are set correctly.
•
Make sure that the paper is loaded correctly and that the leading edge is fully
inserted into the printer.
•
Always insert paper into the multi-purpose tray with the side you want to print on
facing down. To avoid misfeeds and paper jams, paper should be inserted into the
tray with the correct side as the leading edge.
•
Do not load adhesive labels with plain paper. If you want to load adhesive labels
when plain paper is loaded, remove all the plain paper, then load the adhesive
labels.
•
Check the right side of the adhesive labels. Load them face down into the multi-
purpose tray one sheet at a time.
•
Be sure to load adhesive labels in landscape orientation.
NOTE
•
When the paper such as A4- or letter-sized paper is loaded in the landscape
orientation, the left side of paper will be the top end of image as viewed from the
front of the main unit.
•
When the paper such as B4- or A3-sized paper is loaded in the portrait orientation,
the far side of the paper will be the top end of image.
Limit Guide