manualshive.com logo in svg

Canon LBP-2000, Руководство пользователя, Страница: 140 / 263

Поделиться
Скачать
Canon LBP-2000 Скачать руководство пользователя страница 140

 

Replacing the Toner Cartridge

 

8-3

 

Maintenance

 

8

 

•

 

The toner cartridge has a life span up to approximately 10000 copies when A4-size 
paper is printed in landscape orientation. This is based on printing typical word 
processing documents that have about 5% page coverage with the print density adjusted 
to the factory default. The life of your cartridge may vary depending on how it is used. If 
your average document contains a lot of graphics, shading or bold printing, then the life of 
the toner cartridge will be shorter.

 

When to Replace the Toner Cartridge

 

Before Replacing the Toner Cartridge

 

You can use the following simple procedure to extend the life of the cartridge:

WARNING

 

•

 

If you get loose toner powder on your hands or clothing, wash it off with cold 
water immediately.

NOTE

 

•

 

<TONER LOW> is a warning message that indicates there is not much toner remaining 
in the toner cartridge. The printer will not stop printing.

 

1

 

Grasp the tabs on either side of the multi-purpose tray and 
pull it open.

IMPORTANT

 

•

 

Support the tray with both hands when opening it.

Содержание LBP-2000








































































































































































































































































Отзывы:

Нет отзывов