Canon LBP 1760 - B/W Laser Printer Скачать руководство пользователя страница 67

Страница: 67 / 234

Resetting the Default Values

Follow the procedures in this section to reset the printer. You can reset this printer in

three ways:

■

The RESET=PRINTER function clears the memory of all fonts, macros or page
information and does not affect the menu settings.

■

The RESET=MENU function clears the memory of all fonts, macros and page
information and restores most of the menu settings to their factory defaults.

■

A cold reset clears memory and restores all menu settings to their factory default
settings, with the exception of the page count value.

Resetting the printer or menus

Follow this procedure to do a printer or menu reset:

Press

to take the printer off-line. At this time, make sure the

On Line

indicator

is off. The READY message will change to PAUSED.

Press

Menu

. PCL MENU is displayed in the top line.

Press

Menu

until you see RESET MENU.

Press

Item

until you see RESET=XXXX.

Press

Value

to display PRINTER or MENU in the bottom line.

PRINTER

Clears all temporary soft fonts, temporary macros and page data stored
in the memory.

MENU

Clears all temporary soft fonts, temporary macros and page data stored

in the memory and restores most of the factory default settings.

Resetting the Default Values

RESET MENU

RESET MENU
RESET=PRINTER

Содержание LBP 1760 - B/W Laser Printer











































































































































































































































Результаты поиска

Содержание LBP 1760 - B/W Laser Printer

Отзывы:

Canon LBP 1760 - B/W Laser Printer, Руководство пользователя, Страница: 67 / 234

Результаты поиска

Содержание LBP 1760 - B/W Laser Printer

Отзывы: