manualshive.com logo in svg

Canon LBP 1760 - B/W Laser Printer, Руководство пользователя, Страница: 145 / 234

Поделиться
Скачать
Canon LBP 1760 - B/W Laser Printer Скачать руководство пользователя страница 145

137

7

Responding to Error Messages

MEMORY

A memory overflow has occurred.

OVERFLOW

The printer has received more data than it can hold in the available
memory on the printer.  This can occur if too many soft fonts, macros or
complex graphics are sent to the printer.
Press Go and the job will continue printing, although data may be lost.
Simplify the print job by deleting unnecessary fonts or macros from the
printer memory, or add additional memory to the printer (see Getting
Started Guide).

MRT COMPRESSION

The printer is using MRT Compression, with the possibility of print
quality degration (lossy compression).
MRT means 

memory reduction technology

 and refers to the hardware and

software technologies required to reduce the amount of memory needed
to print complex pages.  No action required.

This message is displayed when RESET=MENU is selected in the
RESET MENU.
No action required.

This message is displayed when RESET=PRINTER is selected in
the RESET MENU.
No action required.

No toner cartridge is installed in the printer, or the toner cartridge
is not installed correctly.
Replace the toner cartridge or, if a toner cartridge is installed, remove
it and insert it again.  Ensure the toner cartridge is positioned correctly.

OPTION RAM ERROR

This is an error caused by a RAM (DIMM) installed in the printer.
An optional RAM has failed its startup diagnostic check. The optional
RAM must be reinstalled or replaced.

OPTION ROM ERROR

This is an error caused by a ROM (DIMM) (such as the A5 module)
installed in the printer.
An optional ROM has failed its startup diagnostic check.  The optional
ROM must be reprogrammed or replaced.

PAPER JAM

A paper jam has occurred in the printer.
Remove the jammed paper.  The top cover must be opened and closed
to resume printing.  Press Go to put the printer back on-line (see page
143).

PAGES:####

This message is displayed when SHOW PAGE COUNT is selected
in the TEST MENU, where #### is the total number of pages that
have been printed by the printer.
No action required.

TONER CART
MISSING

RESTORING
DEFAULTS

RESETTING
PRINTER

Содержание LBP 1760 - B/W Laser Printer











































































































































































































































Отзывы:

Нет отзывов