manualshive.com logo in svg

Canon Laser Class 700 Series, Справочное руководство

Поделиться
Скачать
Canon Laser Class 700 Series Скачать руководство пользователя страница 167

Changing the Toner Cartridge

6-5

Maintenance

6

CF-PL Reference Guide_USEN HT1-2187-000-V.1.0

4

While holding the cartridge by the ends, rock it gently five or 
six times to distribute the toner evenly inside the cartridge.

5

Place the cartridge on a stable, flat, clean surface, and snap 
the tab on the side to detach it from the cartridge.

\

6

As you steady the cartridge with one hand, remove the tape 
by gently pulling the plastic tab straight out with your other 
hand.

Use a firm, even pull to avoid breaking the tape.

IMPORTANT

• Do not pull the tab upwards or downwards. The tape may break. 

• If the tab breaks off from the tape, pull the tape out by pulling on the end of the tape 

where the tab was originally attached.

• Wash off any toner from your hands or clothing immediately with cold water.

Pull straight out

Содержание Laser Class 700 Series






























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды