manualshive.com logo in svg

Canon iX7000 Series, Руководство по обслуживанию

Поделиться
Скачать
Canon iX7000 Series Скачать руководство пользователя страница 44

4-2.  Service Mode  

(1)  Service mode operation procedures 

Use the Service Tool on the connected computer. 

1)  Start the printer in the service mode. 

i.  With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power 

button. (DO NOT release the buttons.) 

ii.  When the Power LED lights in green, while holding the Power button, release the 

Resume/Cancel button. (DO NOT release the Power button.) 

iii.  While holding the Power button, press the Resume/Cancel button 2 times, and then release 

both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, 
the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting 
with Alarm LED.) 

iv.  When the Power LED lights in green, the printer is ready for the service mode operation. 

2)  Start the Service Tool on the connected computer. 

i.  When a button is clicked in the Service Tool dialog box, that function is performed. During operation 

of the selected function, all the Service Tool buttons are dimmed and inactive. 

ii.  When the operation is completed, "A function was finished." is displayed, and another function 

can be selected. 

iii.  If a non-supported function is selected, "Error!" is displayed. Click 

OK

 in the error message 

dialog box to exit the error. 

 

41 / 53

Содержание iX7000 Series

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды