Canon iX7000 Series, Руководство по обслуживанию

Страница: 14 / 56

tank replacement. When the
error is cleared by pressing the
Resume/Cancel button, Clear
ink may run out during printing.
5 times Print head not
installed, or not
properly installed. [1401] U051 Install the print head properly. - Print head
- Carriage unit
- Logic board
Faulty print head
ID. U052 Re-set the print head. If the
error is not cleared, the print
head may be defective. Replace
the print head.
- Print head
- Logic board
Print head
temperature sensor
error. [1403]
Faulty EEPROM
data of the print
head. [1405]
6 times Paper not set
properly in the
manual feed slot. [1330] --- Set the paper in the manual feed
slot properly, and press the
Resume/Cancel button. (The
error is indicated when paper
does not feed from the front
tray though paper is supposed
to be set in the manual feed
slot.) - ASF unit
- Bottom case unit
- Cassette
7 times Multiple ink tanks
of the same color
installed. [1487] U071 Replace the wrong ink tank(s)
with the correct one(s).
- Ink tank
- Logic board
Ink tank in a wrong
position. [1680] U072 Install the ink tank(s) in the
correct position.
8 times Warning: The ink
absorber becomes
almost full. [1700] --- Replace the ink absorber, and
reset its counter. [See
4-4.
Special Notes on Servicing, (4)
Ink absorber counter setting.
]
Pressing the Resume/Cancel
button will exit the error, and
enable printing without
replacing the ink absorber.
However, when the ink
absorber becomes full, no
further printing can be
performed unless the applicable
ink absorber is replaced.
- Absorber kit
10 times Paper size not
supported for
automatic duplex
printing. [1310] --- Set a supported size of paper,
and press the Resume/Cancel
button. - ASF unit
11 / 53