manualshive.com logo in svg

Canon iX6500 Series, Руководство по обслуживанию, Страница: 15 / 56

Поделиться
Скачать
Canon iX6500 Series Скачать руководство пользователя страница 15

system unit 

(2)  Main case unit 
(3)  Print unit 
(4)  See 

2-2. Disassembly & Reassembly 

Procedures

. 

 

- See 

2-2. Disassembly & Reassembly Procedures, 

(8) Purge drive system unit (right plate) and 
switch system unit (left plate) removal

, for 

details.

 

- See 

2-2. Disassembly & Reassembly Procedures, 

(9) Engine unit reassembly

, for details.

 

 

Caution: 
- The screws securing the paper feed motor are 

allowed to be loosened only for paper feed motor 
replacement. (DO NOT loosen them in any other 
cases.) 

[See 

3-5. Special Notes on Servicing, 

(2) Paper feed motor adjustment

, for 

details.] 

 

In the service mode:

 

2. Print the integrated inspection pattern.

Paper feed 
motor 

Platen unit 

(1)  Front panel cover L 
(2)  Main case unit 
(3)  Print unit 
(4)  See 

2-2. Disassembly & Reassembly 

Procedures

, from this step. 

In the service mode:

 

1. Perform LF / Eject correction (only 

when uneven printing or streaks 
appear on printouts after 
replacement).  
[See 

3-3. Adjustment and Settings in 

Service Mode

, for details.]  

2. Print the integrated inspection pattern. 

Spur unit 

(1)  Front panel cover L 
(2)  Main case unit 
(3)  Print unit 
(4)  See 

2-2. Disassembly & Reassembly 

Procedures

. 

 

Caution: 
- DO NOT contact the spur edges. 

In the service mode:

 

1. Print the integrated inspection pattern.
2. Perform LF / Eject correction (only 

when uneven printing or streaks 
appear on printouts after 
replacement).  
[See 

3-3. Adjustment and Settings in 

Service Mode

, for details.]  

Purge drive 
system unit 

(1)  Front panel cover L 
(2)  Main case unit 
(3)  Print unit 
(4)  See 

2-2. Disassembly & Reassembly 

Procedures

. 

 

- See 

2-2. Disassembly & Reassembly Procedures, 

(8) Purge drive system unit (right plate) and 
switch system unit (left plate) removal

, for 

details.

 

- See 

2-2. Disassembly & Reassembly Procedures, 

(9) Engine unit reassembly

, for details.

 

In the service mode:

 

1. Print the integrated inspection pattern.

Carriage rail 
and carriage 

See 

2-2. Disassembly & Reassembly Procedures

, and 

Parts Catalog. 

1. Apply grease to the sliding portions. 

[See 

3-4. Grease Application

, for 

11 / 52

Содержание iX6500 Series

























































Отзывы:

Нет отзывов