Canon iR3245, Сетевое руководство

Страница: 242 / 288

7
Troubleshooting
7-14 Data Sending/File Sharing Problems and Remedies
Unable to Send Data/Share Files (Windows and Samba File Sharing)
Cause 1
File sharing settings for the shared folder are incorrect.
Remedy
Check the following settings:
On the computer you are using, go into Windows Explorer
→
double-click [Entire Network]
→
check that the computer you want to share is listed there. You can also check for the computer as
follows: On the [Start] menu, point to [Find]
→
click [Computer]
→
enter the name of the
computer you want to share
→
check that the computer is on the network.
If the computer you want to share is listed, double-click its icon to see whether the shared name of
the folder you want to share is listed.
If the shared name does not appear, see "Setting Up a Computer as a File Server(p.3-96)," and
then check the shared folder settings.
Cause 2
An error message is displayed on the touch panel display of the
machine.
Remedy
After confirming the error message, perform the necessary operations
according to the error message displayed.
<Check the server.> is displayed when you try to use a WebDAV server.
Cause
The WebDAV server is unavailable.
Remedy
Confirm the status of the WebDAV server.
<TCP/IP error> is displayed when you try to send to a WebDAV server.
Cause 1
The IPv4 address is set to '0.0.0.0', because it cannot be obtained
automatically via DHCP, RARP, or BOOTP when the IPv4 address
setting in SRAM is set to '0.0.0.0'.
Remedy
See "TCP/IPv4 Settings(p.3-4)" to specify the correct IPv4 address.
Cause 2
The static IPv4 address is set to '0.0.0.0' when the IPv4 address setting
in SRAM is set to '0.0.0.0'.
Remedy
See "TCP/IPv4 Settings(p.3-4)" to specify the correct IPv4 address.
Cause 3
The IPv6 addresses are not properly set up.
Acesst 1.0 6251194