Canon iR3245, Сетевое руководство

Страница: 138 / 288

3
Using
a
TCP/IP
Network
3-86 Mac OS X 10.3 or later
Mac OS X 10.3 or later
1. Check the settings for <RX/Print Range> in [IP Address Range Settings] on
the IPv4 or IPv6 Settings screen to see whether the IP address of the
computer in which a driver is to be installed is permitted. For details, see step
8 in " TCP/IPv4 Settings (p.3-4) ," or step 6 in " TCP/IPv6 Settings (p.3-13) ."
If the settings for <RX/Print Range> in [IP Address Range Settings] on the IPv4 or IPv6 Settings screen do
not permit the IP address, you cannot install a driver.
If the IP address of the computer is beyond the range of the permitted addresses set for <RX/Print Range>
after installing a driver, you cannot print or send a fax from the computer.
2. Install the driver.
Install the driver according to the instructions in the manual for each driver.
If you want to use the UFR II printer driver
See the Mac UFR II Driver Guide.
If you want to use the PS printer driver
See the Mac PS Driver Guide.
If you want to use a PS printer driver provided by Apple Inc.
For instructions on how to install the corresponding PPD file from Canon, see Chapter 10,
"Before Printing from Computers," in Getting Started. For details about the PS printer
driver, see the documentation provided with your Macintosh.
The PS printer driver can be used only in a Mac OS X 10.3.9 or later environment.
Acesst 1.0 6251194