Canon iR2000 Series Скачать руководство пользователя страница 662

Страница: 662 / 738

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical

theory, installation, maintenance, and repair of products. This manual covers all localities

where the products are sold. For this reason, there may be information in this manual

that does not apply to your locality.

Corrections

This manual may contain technical inaccuracies or typographical errors due to

improvements or changes in products. When changes occur in applicable products or in

the contents of this manual, Canon will release technical information as the need arises.

In the event of major changes in the contents of this manual over a long or short period,

Canon will issue a new edition of this manual.

The following paragraph does not apply to any countries where such provisions are

inconsistent with local law.

Trademarks

The product names and company names used in this manual are the registered

trademarks of the individual companies.

manual may not be copied, reproduced or translated into another language, in whole or in

part, without the written consent of Canon Inc.

CANON FAX BOARD REV.0 MAR. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)

Caution

Use of this manual should be strictly supervised to avoid disclosure of confidential information.

Printed in Japan

Imprimé au Japon

Содержание iR2000 Series








































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание iR2000 Series

Отзывы:

Похожие инструкции для iR2000 Series

Бренды по названию

Популярные бренды

Canon iR2000 Series, Руководство по обслуживанию

Результаты поиска

Содержание iR2000 Series

Отзывы:

Похожие инструкции для iR2000 Series

Бренды по названию

Популярные бренды