Canon iR2000 Series, Руководство по обслуживанию

Страница: 494 / 738

CHAPTER 13 TROUBLESHOOTING
COPYRIGHT© 2002 CANON INC. 2000 CANON iR1600/iR2000/iR1610/iR2010 SERIES REV.0 MAR. 2002
13-116
[No. 24]
Use it to set the pseudo RBT transmission level used when making a fax/tel switch-over.
[No. 25]
Use it to set the length of time during which the absence of sound on the line, 2nd NSS
signal, or CNG signal transmitted by the other party is monitored after the answering
phone acquires the telephone line when answering machine mode is selected.
[No. 27]
Use it to change the detection evaluation time. (Command analysis is started when the
V.21 low-speed command preamble is detected continuously for a specific period of
time.)
[No. 28]
Use it to set the length of time during which the Menu Select screen is indicated on the
LCD.
[No. 56 through 61]
Use it to confirm the count type indicated on the Counter Check screen, which appears in
response to a press on the Counter key.
When ‘0’ is selected, count type will not be indicated.
No. 56 : fix to total 1 (101) for the counter 1 reading.
No. 57 : use it to select a count type for the counter 2 reading.
No. 58 : use it to select a count type for the counter 3 reading.
No. 59 : use it to select a count type for the counter 4 reading.
No. 60 : use it to select a count type for the counter 5 reading.
No. 61 : use it to select a count type for the counter 6 reading.
If above selections have been made, the counters will be displayed in order of counter
numbers.
<Soft Counter Specifications>
The soft counters are classified as follows according to input numbers:
100s : total
200s : copy
300s : print
500s : scan
700s : received print
800s : report print