Canon iR2000 Series, Справочное руководство, Страница: 46 / 194

Before You Start
U
s
ing This Ma
chine
1
1-28 Placing Originals
Placing Originals in the Optional Feeder (ADF-J1)
If the machine is equipped with the optional feeder, place a stack of originals, and press (Start).
The machine automatically scans them into memory.
You can place the following originals in the original supply tray:
•
Weight: 38 to 128 g/m 2 (set the originals one-by-one when they are very thin
(38 to 52 g/m
2
) or very thick (105 to 128 g/m
2
))
•
Size: A3 , B4 , A4 , A4 , B5 , B5 , A5 , A5 , B6 , 11''
✕
17'' , LGL ,
LTR , LTR , and STMT .
•
Tray capacity: 50 sheets (A4 or smaller)
25 sheets (B4 or larger)
IMPORTANT
•
Do not place the following types of originals in the feeder:
- Originals with tears or large binding holes
- Severely curled originals or originals with sharp folds
- Clipped or stapled originals
- Carbon-backed paper or other originals which might not feed smoothly
- Transparencies and other highly transparent originals
•
Avoid scanning the same original using the feeder more than approximately 30 times. From being scanned repeatedly,
the original gets folded or torn, which may cause a paper jam.
•
If the feeder rollers are soiled from scanning an original written with pencil, perform the Feeder Cleaning procedure.
(See “Cleaning the Feeder,” on p. 5-23.)
1
Neatly place your originals face up in the original supply tray.
When enlarging A4, B5 or A5-size originals to A3 or B4-size paper, place your originals horizontally.
Place the original as far as it will go, until the original set indicator is lit.
A beep sounds when the original is set correctly.