Canon iR2000 Series Скачать руководство пользователя страница 34

Страница: 34 / 194

1-16

Main Power and Control Panel Power

Before You Start

ing This Ma

chine

Main Power and Control Panel Power

The machine is provided with two power buttons, a main power button and a Energy Saver button
(

How to Turn On the Main Power

This section explains about how to turn on the main power.

Make sure that the power plug is firmly inserted into the power outlet.

WARNING

•

Never remove or insert the power plug with wet hands. This can cause an electrical shock.

Press the power switch to ON (“ I ” side). The main power switch is located on the right
side of the machine.

When turning off the main power, press the main power switch to the “O” side.

The main power indicator on the control panel lights.

If the main power indicator does not light, check if the power plug is firmly inserted into the power outlet.

Содержание iR2000 Series



































































































































































































Результаты поиска

Содержание iR2000 Series

Отзывы:

Canon iR2000 Series, Справочное руководство, Страница: 34 / 194

Результаты поиска

Содержание iR2000 Series

Отзывы: